So good you wouldn’t know it was there…

Timbermate Wood filler is an Interior grade 4 in 1 Wood Putty, Grain Filler, Edge Filler and Crack Filler. When thinned slightly with water can also be used as a sanding sealer.

Timbermate does not shrink, sink, crack or fall out and has an indefinite shelf life. It is non-flammable, non-toxic and can be used to the last gram.

Timbermate is proudly 100% Australian made and 100% Australian owned.

Restores timber like new. Save on costly replacements.

Earl’s Wood Hardener penetrates into soft rotted wood fibres, restoring them to near original strength. This means you can repair even the most damaged wood, ready for full restoration.

No longer do you need to dig out the rot. Simply apply and Earl’s Wood Hardener will penetrate. Once dry, patch and paint (if desired). It’s as easy as 1-2-3!

Patch, embed or anchor, Concremate expands and grips as it dries, embedding the item in the surrounding material

Mixed to a workable mortar-like consistency, Concremate sets in 30 minutes and sets harder than concrete in 28 days. An expanding element in Concremate offsets drying shrinkage (often a problem in similar products) which causes it to grip embedded items and surrounding material with bulldog tenacity. Expansion is 1/8%.

Agnew’s Water Putty, the original and the best since 1929

Agnew’s Water Putty is an excellent filler for patching and levelling wood, plasterboard, cement sheet, concrete, etc. Agnew’s Water Putty is particularly suitable if you need a hardwearing surface.

Agnew’s Water Putty sets hard, adheres permanently and fills to any depth without shrinking or cracking. It can be sawn, drilled and sanded. Agnew’s Water Putty is also ideal for architectural and hobby moulding.

Colours to suit almost any timber

Waxstix are so easy to use and so handy for quick repairs to scratched or damaged timber. Waxstix can be coated and stained. Plus, Waxstix contain no beeswax so they will not leave any white ring marking otherwise known as the “halo effect”.

For most small scratches, simply rub the stick over the damaged area. For larger, deeper indentations (where TIMBERMATE water-based Woodfiller cannot be used), heat a knife blade with a flame or a soldering iron or stove lighter and fill the damaged area with hot wax. Remove excess wax by rubbing with the smooth side of sandpaper, a piece of cardboard or an old credit card. Use a cotton cloth to buff and remove excess wax.